Performance and Prevention of Faults in Petroleum Machinery and Equipment

China‘s modern oil companies, oil machinery failure occurred mostly due to the mutual wear and tear between the machinery caused by this wear and tear for mechanical damage is relatively large, so to prevent oil drilling machinery and equipment failure is more important one , Is to reduce the wear and tear of various mechanical parts. Prevention methods are the following: standard operation, regular training and assessment of the operator. As the oil drilling equipment operators, the operation of equipment is standardized, whether in accordance with the relevant requirements to operate the equipment will directly determine the failure rate of mechanical equipment, so in the daily operation of equipment, to standardize operations, such as starting Before the mechanical equipment, in accordance with the specification, to check the cooling fluid is sufficient, in the preheating stage also have to wait for the coolant and oil to a certain temperature, to start normal work, and some operators because of impatience and negligence, Not in accordance with the above specifications to operate, it will cause serious loss of machinery and equipment, increase the incidence of mechanical equipment failure. So in our daily work, we must continue to enhance the operator‘s awareness of the norms of the important equipment operators to regularly carry out training to strengthen the standardized operation; In addition to these personnel assessment, did not meet the requirements, and resolutely not allowed The operation of equipment, which can greatly reduce the failure of mechanical equipment.